Durotech Duroproof ATC Topcoat

FEATURES

• ATC represents the highest standards in aliphatic polyurethane waterproofing technology and provides the following benefits and advantages.
• Provides excellent UV protection.
• Extends the life of the waterproofing membrane system.
• Meets the ‘Green Star’ environmental criteria.
• Single pack – no mixing.
• Curing (usually within) 24 hours.
• Permanently flexible.
• Suitable for immersion in water.
• Good chemical resistance.
• High strength and puncture resistant.
• Provides seamless membrane (no joints or laps)
• Easily repaired and or maintained.
• Easy to apply.

SUBSTRATES

ATC have been formulated as top coat over
Polyurethane Membrane.

LIMITATIONS

Suitable for maintenance foot traffic and not
intended as a general trafficable membrane.

APPLICATION & COVERAGE

Apply ATC to Polyurethane Membrane by brush, roller,
broom and squeegee usually in one or two coats at the rate
of 3m² per litre per coat, so that the minimum dry film
thickness is 300 microns.
The stated average coverage rate may vary depending upon
type, condition, porosity, texture of the surface and
application technique.

DRYING TIME

Generally Duroproof ATC is weather resistant within 6 to 8
hours.
Full cure within 24 hours.
*Drying and curing of the product is affected by type,
dryness and porosity of the surface, temperature, humidity,
ventilation, climate conditions and application technique
and therefore drying and curing can only be given as a
guide.