Gripset P10 VAPOUR BARRIER & SURFACE ENHANCER

Gripset P10 is high performance one component compound that is designed to be applied over mineral surfaces such as screeds, concrete, masonry and general cementitious surfaces to prevent the rise or entry of residual dampness and active moisture vapour into the built environment. Gripset P10 is a moisture curing solvent free polyurethane resin that dries to the moisture present in surrounding air and in surfaces it is applied to. As a solvent free and odourless product, Gripset P10 will emit no dangerous toxins to the surrounding environment, ideally suited for internal or confined areas as a primer or protective coating.

In addition to the moisture blocking properties conditions, Gripset P10 can be used for consolidating cement screeds or concrete toppings that are mechanically weak due to defects, moisture or lack of binder. Also suitable as an anti-dust treatment for irregular, porous and dusty cementitious screeds.

Features & Benefits :

• Excellent adhesion properties.
• Resistance on vertical & horizontal surfaces to negative hydrostatic conditions up to 5 bar of pressure.
• Waterproof seal once cured.
• One component product, avoiding mixing and rapid setting wastage of 2 component primers.
• Suitable for internal and external applications.
• Can be sand filled for high build repairs.
• Solvent free and odourless.

Substrates Substrates :

suitable for bonding Gripset P10 over include

• Concrete, masonry surfaces, renders, screeds.
• Concrete blocks and aerated concrete.
• Timber sheeting, softwoods and hardwoods.
• Compressed fibre and cement sheeting.

Application and Coverage :

Vapour Block Primer

• Apply 1 x coat of Gripset P10 at a total minimum coverage of 1 litre/8-10m².
• Application by brush or short nap roller. Moisture Barrier.
• To provide optimum moisture inhibitor properties, against head of pressure (max 5 bar), apply 2 x coats of Gripset P10 at a total minimum coverage of 1litre per 4-5m². Allow 3-6 hours drying between coats of Gripset P10.

IMPORTANT: For the blocking of vapours and negative entry of moisture on vertical surfaces, running or dripping water must be first treated with Gripset C-Plug. Do not apply Gripset P10 to surfaces where surface water is present.

Surface Enhancer

• Apply 1 x coat of Gripset P10 at a total coverage of 1 litre/8- 10m² for anti-dust or surface consolidation applications.
• For extremely porous surfaces use coverage as per Moisture Barrier instructions above.

Precautions :

• Maximum allowed humidity or residual moisture in surface is 5% (measured with carbide hygrometer) • Not designed for prolonged UV exposure. For external areas, finish over within 48 hours.
• If adding sand into P10 ensure sand is dry and free of moisture.
• Not to be used as a finished sealer coat in external applications.
• Do not apply when surface temperature is below 5°C or above 35°C.
• Safety Data sheet (SDS) available.
• For further information, contact the Gripset Technical Department.