Durotech Duromix Hibuild WBE

DUROMIX Hibuild WBE is a two component water based epoxy coating used to prime, seal and coat concrete or masonry surfaces. It cures to a tough chemical and water resistant coating having excellent adhesion to sound concrete.

FEATURES

• Water based
• Ultra low VOC
• Environmentally friendly
• Excellent water resistance
• Excellent oil resistance.
• Excellent adhesion to fresh concrete
• Applicable to damp surfaces
• Resists hydrostatic pressure when cured
• Requires a UV resistant top coat when in direct sunlight e.g. Duropond

SUBSTRATES

• Concrete
• Cement and cement render
• FC and CFC Sheeting
• Block & Brick work
• Masonry/Stone
• FC, CFC, asbestos and Blue board sheeting
• Particle board
  -complies with AZ/NZS 1859.1, structural plywood (Type A Stamped “PAA JAS-ANZ” to AS/NZS2269- 2004) flooring in wet areas.
• Scyon & composite sheeting
• Acrylic coatings
• Vitreous, ceramic & terra cotta tiles
• Bitumen
• Metal
• Milled finish alloy angles
• Timber, Particle Board, Plywood
• Masonite
• Plaster board
• Extruded foam
• Fibreglass/Gelcoat/PVC

USE AREA

• Fish ponds
• Retaining walls
• Reverse Tanking
• Primer for acrylic & polyurethane membranes
• Dust sealing concrete floors
• Waterproofing concrete slabs prior to vinyl and timber overlays
• Concrete curing membrane
• Moisture barrier on damp walls/floors

TECHNICAL INFORMATION

• Colour – Light Grey, Semi-gloss when dry / matt when aged
• Drying Time @ 23°C, 50% Relative Humidity *Drying/curing times may be prolonged in cooler temperatures.
  Recoat Time: 2-4 Hours
  Applying finishes over: 24 hours
  Full Cure: 7 days
• Pot Life 1-2 hours
• Volume solids 48%
• Mixing ratio: 1:1 by volume
• Wet film thickness: 300 micron/0.3mm per coat
• VOC Content (ISO 13741) Nil
• Water Vapour Transmission/ASTM E96
  ASTM 4541:
  1.4g//24h/m² – 1 x coat
  0.8g//24h/m² – 2 x coats
• Wet Film Thickness: 300micron/0.3mm
• Hydrostatic pressure resistance: 250kpa / 25m head of water pressure