Waterproofing Training Courses Update Your Skill Set Register Now

Choosing the Right Waterproofing Products for the Job Learn More

Cementaid Silicone S50

In Stock
$314.60
(AUD) inc GST

REQUIREMENTS:

Surface preservation & protection against moisture penetration (e.g. wind-driven rain, etc) for concrete, block-work, masonry, renders, etc. Long term protection of concrete, brick and stonework against weathering, staining or mould decay, while enhancing natural texture and appearance. Protective surface treatment for all masonry in marine environments. Long term preservation and protection for pre-cast exposed aggregate panels, architectural concrete and masonry.

HOW TO SPECIFY:

All exposed surfaces (specify areas and masonry type) shall be weatherproofed by a single flooded application of Cementaid SILICONE S50 at manufacturer’s recommended coverage rates. All surfaces to be clean and dry before application.

COVERAGE:

Pressed clay brickwork/pavers – Not less than 1 litre per 5.0 sq. metres

Texture and wire cut bricks – Not less than 1 litre per 3.5 sq. metres

Concrete and cement render – Not less then 1 litre per 3-6 sq. metres

Concrete block – Not less than 1 litre per 2-3 sq. metres

Fibro cement roofing and wall cladding – Not less than 1 litre per 3.0 sq. metres

Sandstone – Not less than 1 litre per 2.0 sq. metres

Mt Gambier Stone – Not less than 1 litre per 1.5 sq. metres

Terracotta or cement tiles – Not less than 1 litre per 5.0 sq. metres

EFFECTS:

SILICONE S50 is a unique combination of Silicones and Acrylic Glazing Liquid. Surfaces treated are not only water repellent but sealed to resist penetration of rain water under wind pressure. SILICONE S50 in a single application highlights the natural colour of masonry but does not produce a glazed finish. Two applications produces a “wetted” effect and a subdued glaze to dense surfaces such as exposed aggregate concrete panels and roof tiles.

WHERE RECOMMENDED:

All natural unpainted masonry surfaces.

Quantity:
SKU: CEM-SiliconS5015 Category:

REQUIREMENTS:

Surface preservation & protection against moisture penetration (e.g. wind-driven rain, etc) for concrete, block-work, masonry, renders, etc. Long term protection of concrete, brick and stonework against weathering, staining or mould decay, while enhancing natural texture and appearance. Protective surface treatment for all masonry in marine environments. Long term preservation and protection for pre-cast exposed aggregate panels, architectural concrete and masonry.

HOW TO SPECIFY:

All exposed surfaces (specify areas and masonry type) shall be weatherproofed by a single flooded application of Cementaid SILICONE S50 at manufacturer’s recommended coverage rates. All surfaces to be clean and dry before application.

COVERAGE:

Pressed clay brickwork/pavers - Not less than 1 litre per 5.0 sq. metres

Texture and wire cut bricks - Not less than 1 litre per 3.5 sq. metres

Concrete and cement render - Not less then 1 litre per 3-6 sq. metres

Concrete block - Not less than 1 litre per 2-3 sq. metres

Fibro cement roofing and wall cladding - Not less than 1 litre per 3.0 sq. metres

Sandstone - Not less than 1 litre per 2.0 sq. metres

Mt Gambier Stone - Not less than 1 litre per 1.5 sq. metres

Terracotta or cement tiles - Not less than 1 litre per 5.0 sq. metres

EFFECTS:

SILICONE S50 is a unique combination of Silicones and Acrylic Glazing Liquid. Surfaces treated are not only water repellent but sealed to resist penetration of rain water under wind pressure. SILICONE S50 in a single application highlights the natural colour of masonry but does not produce a glazed finish. Two applications produces a “wetted” effect and a subdued glaze to dense surfaces such as exposed aggregate concrete panels and roof tiles.

WHERE RECOMMENDED:

All natural unpainted masonry surfaces.

CEM-SiliconS5015
Cementaid
Clear Sealers, Penetrative Sealants
Sealers
N/A
15L
Pail
Refer to Technical data sheet
pdf icon Cementaid Silicone S50
SEARCH
Google Rating
4.9
Based on 56 reviews
js_loader
js_loader
Google Rating
4.9
Based on 56 reviews
js_loader