T-Rex Power Bond

T-Rex Power Fast Grab is the most versatile T Rex Adhesive and sealant with 1 second immediate grab. It has incredible high-end strength of 320kg’s per 10cm2 and even adheres to damp surfaces. It is based on the unique SMX® Polymer technology developed by Soudal.

Properties :

• High fast grab reducing the need for initial support.
• Fast curing.
• Good extrudability.
• high shear strength after full cure (no primer)
• Remains elastic after curing & very sustainable.
• No odour.
• Can be painted with water-based systems.
• Good weather and UV resistance.
• Doesn’t contain isocyanates or silicones.
• Good adhesion on slightly moist substrates.

Applications :

• Sealing and bonding in the building and construction industry using T Rex Sealant.
• Elastic bonding of panels, profiles, and other pieces on the most common substrates (wood, MDF, chipboard, etc) with T Rex Glue.
• Elastic structural bonding in car and container industry.

T Rex Glue

Remarks :

• T-Rex Power Fast Grab may be overpainted with water-based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.
• The drying time of alkyd resin-based paints may increase.
• T-Rex Power Fast Grab can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend a preliminary compatibility test.
• While producing plastics, very often releasing agents, processing aids, and other protective agents (like protection foil) are used. These should be removed prior to bonding with T Rex Adhesive. For optimum adhesion, the use of Surface Activator is recommended.
• T-Rex Power Fast Grab cannot be used as a glazing sealant.
• T-Rex Power Fast Grab can be used for bonding of natural stone, but it cannot be used as a joint sealant on this type of surface. T-Rex Power Fast Grab can therefore only be used on the bottom of natural stone tiles.
• When applying, make sure that the surface of the materials is not smudged with sealant.
• A total absence of UV can cause a color change of the sealant.
• When using different reactive joint sealants, the first joint sealant must be completely hardened before the next one is applied.
• Not suitable for bonding aquariums.
• Do not use in applications where continuous water immersion is possible.
• Discoloration due to chemicals, high temperatures, UV-radiation may occur. A change in colour does not affect the technical properties of the product.
• Contact with bitumen, tar or other plasticizer releasing materials such as EPDM, neoprene, butyl, etc. is to be avoided since it can give rise to discolouration and loss of adhesion.

Chemical resistance :

T Rex Sealant offers good resistance to (salt) water, aliphatic solvents, hydrocarbons, ketones, esters, alcohols, diluted mineral acids, and alkalis. However, it has poor resistance to aromatic solvents, concentrated acids, and chlorinated hydrocarbons.

Health- and Safety Recommendations :

Take the usual labour hygiene into account. Consult label and material safety data sheet for more information.