Grout Shield

Description
A water based silicone sealer that repels water and shields the grout from contaminants and staining. Does not change the appearance of the grout.

Uses
A grout sealer for sanded and fine grouts on exterior and interior floors and walls.

Features
• Does not change appearance
• Shields the grout from contaminants
• Allows the grout to breathe

Coverage (Approximate)
3-8m2 per coat/250ml, depending on grout width and porosity.

Test Area
Apply Grout Shield to a small area to test suitability and application before commencing the whole area. Read the label thoroughly before proceeding.

Limitations
1. Grout Shield penetrates into the grout and the application should last 5+ years. However, in high wear situations on areas subject to harsh cleaning, chemical wear, more frequent repeat sealing may be required.
2. Do not allow the sealer residue to dry on the surface, as residue will be visible. If this does occur, remove residue with an abrasive bathroom cleaner or baking soda mixed with water.

Caution
Use rubber gloves and eye protection when applying product. Flush thoroughly with water product that is in contact with skin or eyes or if ingested seek medical assistance.