Durotech Duroproof PPM Standard

DUROPROOF PPM STD is a high quality, superior
performance single component liquid that cures to
rapidly to form a polyurea/polyurethane hybrid
membrane that is tack-free, high modulus, tough,
flexible and suitable for exterior use*.

FEATURES

• Single component, easy to spread
• Combines high elongation and tensile strength for excellent toughness
• Low odour, low VOC & complies with Green Star requirements
• Trafficable and tack-free overnight cure
• Good abrasion and tear resistance
• Good resistance to weathering
• Class III – elongation as per AS/NZ 4858
• High build application is possible
• UV Resistant
• AS4858 & AS4654.1 Certified

APPLICATION

• Reinforced concrete roofs and decks
• Waterproofing external balconies, podium levels, prior to the application of a variety of surface finishes, such as tiled screeds, supported pavers, timber decking and synthetic grass
• Retaining Walls
• Light traffic installations
• Under paver-pad systems
• Planter box

DRYING TIMES

• Cures within 8 hours @ 25°C & 75% RH
• Recoat within 48 hours

PRECAUTIONS

Do not direct stick tiles to membrane. Use
unbonded screed method in accordance with AS3958.1.
Allow 24 hours to cure, prior to covering with surface
finishes.
Do not apply above 30ºC or below 5ºC ambient temperature. If applying more than one coat externally, ensure before starting the job, that rain is not expected between coats
Do not apply mortar beds until the membrane is fully dry
Protect membrane against damage before and during covering with mortar
Protect membrane against the action of roots
Keep away from heat and flame
Use only with adequate ventilation
Refer to MSDS prior to use

*Durotech Duroproof PPM Standard TDS available here;
Durotech Duroproof PPM STD TDS