Gripset E60 WATER BASED EPOXY

Gripset E60 is a two component water based epoxy compound suitable for use as both a primer and protective coating to prevent moisture penetration and rising damp through mineral surfaces. Able to be applied directly over damp surfaces and newly laid “green” concrete, screeds and renders, Gripset E60 displays excellent positive and negative hydrostatic pressure resistance. Once dried it provides a suitable surface for applying finished coatings including membranes and adhesives directly over. Suitable for use in internal, external, underground and immersed applications.

Features & Benefits :

• Excellent adhesion properties.
• Resistance to negative hydrostatic conditions.
• Pot life 1-2 hours.
• Suitable for internal and external applications.
• Non-flammable, odourless and zero VOC.
• Clean up with water.
• Compatible bonding surface for Gripset membranes, adhesives and other finishes.

Substrates :

Substrates suitable for bonding Gripset E60 over include

• Concrete, masonry surfaces, renders, screeds.
• Concrete blocks and aerated concrete.
• Timber.

Vapour Block Primer /Efflorescence Prevention

Apply 1 x coat at a minimum coverage of 1 litre/3m².

Moisture Barrier

To provide optimum moisture inhibitor properties against a negative head of pressure apply 2 x coats at a coverage of 1litre/3m² per coat. For the blocking of vapours and negative entry of moisture on vertical surfaces, running or dripping water must be first treated with a water plug.

Do not apply Gripset E60 to surfaces where surface water is present. If the recommended coverage has not been achieved in 2 coats, apply further coats until the required coverage is formed.

Coverage may vary due to porosity of substrate.

Precautions :

• Gloves and protection should be used when handling this material.
• Keep containers in well ventilated areas ensuring lids are correctly sealed.
• Ensure adequate ventilation while using and avoid inhalation of vapours.
• Not designed as a trafficable surface. Must be covered with suitable trafficable finishes.
• Shelf life is 12 months in unopened container.
• Do not apply when surface temperature is below 10°C or above 35°C and when relative humidity exceeds 85%.
• Avoid spillage into water courses and drains where possible.
• Safety Data sheet (SDS) available.
• For further information about this product contact technical department of Gripset Industries.